Agricultural Machinery Parts Identification Five Methods

The produced parts are including Auto parts，Agricultural machinery parts, construction scaffolding parts Marine valve and pump components and hydraulic parts etc. Architectural,Machinery,Medical; Food Machinery, Valves and so on. The material which we used Aluminium; Bronze; Brass; Copper; carbon steel; stainless steel and so on.At the same time, we can offer the CNC machining; Phosphating; Blackening Processing;Hot Dip Galvanizing: Powder Coating: Painting: Plating, Assembly for customers.

85% products are sold to overseas, the customers are from America, Canada, Europe Union, etc. 

Sensory identification method: If cracks, breaks, bends, twists, corrosion, fatigue, etc. of parts, can be visually identified; whether the parts are tightly connected, whether the parts themselves have cracks, etc., can be tapped with a small hammer, with the issued The sound is clear and turbid. The cracks of some parts can be smeared with white powder after oil immersion, and then tapped with a small hammer to identify whether there is oil oozing out; you can also shake the matching parts by hand to initially identify the size of the gap.

Gauge measurement and identification method: using a variety of measuring tools to check the fitting size, clearance, surface shape and position deviation, etc. This is a more accurate identification method. Commonly used measuring tools include rulers, strip rulers, calipers, gauges, vernier calipers, percent rulers, and dial gauges.

Sample inspection and identification method: First of all, according to the technical requirements for the production of a standard model, in the identification, as long as the parts to be identified and the model for comparison to see whether the deviation is within the allowable range. This method is simple and practical.

Special instrument inspection and identification methods: such as the use of magnetic flaw detector to check the internal parts of the cracks or voids; use the water pressure tester to check the container sealing performance; use the spring elasticity tester to check the spring elastic state; use the static or dynamic balance test stand to check the balance of the rotating parts State and so on.

Non-demolition appraisal method: It is to measure the horizontal or vertical or oblique distances of various parts under the condition of assembly, measuring tools or other instruments, or to check the closeness, straightness or fit of the gaps. Determine if the part is working properly.