Agricultural machinery parts identification method

The sensory identification method does not use tools and instruments, but judges the technical status of the parts based solely on the experience and sense of the appraisers. Such as parts cracks, breaks, bending, distortion, corrosion, fatigue erosion, etc., can be visually identified; whether the parts are tightly connected, the part itself is a crack, etc., can be tapped with a small hammer, with the voice of clear and turbid Identification; Some parts of the cracks can be painted by whitening after oil immersion, and then tapping with a small hammer, to identify whether there is oil leakage; can also shake the matching parts by hand, initially identified with the size of the gap.

Gauge measurement and identification using a variety of measuring tools to check the size of parts, clearance, surface shape and position deviation, etc., which is a more accurate identification method. Commonly used measuring tools include rulers, strip rulers, calipers, gauges, vernier calipers, percent rulers, and dial gauges.

The produced parts are including Auto parts，Agricultural machinery parts, construction scaffolding parts Marine valve and pump components and hydraulic parts etc. Architectural,Machinery,Medical; Food Machinery, Valves and so on. The material which we used Aluminium; Bronze; Brass; Copper; carbon steel; stainless steel and so on.At the same time, we can offer the CNC machining; Phosphating; Blackening Processing;Hot Dip Galvanizing: Powder Coating: Painting: Plating, Assembly for customers.

85% products are sold to overseas, the customers are from America, Canada, Europe Union, etc.

The prototype inspection and identification method first produces a standard model according to the technical requirements. When the identification is performed, the identified parts are compared with the template to see if the deviation is within the allowable range. This method is simple and practical.

Special instrument inspection and identification methods such as the use of magnetic flaw detector to check the internal parts of the cracks or voids; use the water pressure tester to check the sealing performance of the container; use the spring elasticity tester to check the spring elastic state; use the static or dynamic balance test stand to check the balance of the rotating parts Wait.

Do not disassemble the parts of the appraisal method under the condition of the assembly, use the measuring tool or other instruments, measure the horizontal or vertical or oblique distances between the parts and the nearby parts, or check the closing, straightness or the size of the gap to judge the parts. The working condition is good.